Cars & Vehicles Car Audio

Instructions to Program a 2000 Suburban Key Fob

    • 1). Sit in the driver seat of the Suburban. Check that all doors are closed. Press and hold the "Unlock" button on the driver door's control panel.

    • 2). Insert the key into the ignition. Turn the key to "ON" then "OFF." Repeat the process, stopping in the "OFF" position. Release the "Unlock" button. The door locks will cycle.

    • 3). Press and hold the "Lock" and "Unlock" buttons on the keyless-entry remote. Release the buttons when the door locks cycle again. Turn the key to the "ON" position then back to "OFF" to exit the programming mode.

Leave a reply