Home & Garden Landscaping & Garden & Landscape

How to Install Curtain Rails

    • 1). Hold the curtain rail above the window to decide where you want it go to. Generally, curtains are hung so they will cover the window by two or three inches on the top and each side, and hang down at least that far below the bottom.

    • 2). Use a pencil to mark the wall through the screwholes in the two brackets that will hold the rail to the wall. Depending on the width of the window, you may also need to mark where a center support bracket will go.

    • 3). Make sure each mark is the same distance from the ceiling so your rail will be level.

    • 4). Drill holes at each mark in the wall. Tap screw anchors into each hole with your hammer so they're flush with the wall.

    • 5). Attach each bracket by aligning it with the anchors, threading the screws partly in by hand, then tightening them with a screwdriver.

    • 6). Hang the drapery onto the rail according to its design and set the rail into the brackets.

You might also like on "Home & Garden"

#

How to Seed a Lawn in Kansas

#

Bermuda Grass Varieties

#

Plan to Build a Porch Swing

#

Native Ohio Landscaping Plants

#

How to Plant Peanuts for Deer

#

How to Install Curtain Rails

#

About Patio Chairs

Leave a reply