Home & Garden Maintenance & Repairs

How to String a Travis Rod

    • 1). Measure the width of your traverse curtain rod. Measure the length of the curtain rod to the ground. Double that number and add six. This is the length of curtain string you'll need to string your traverse curtain rod.

    • 2). Put the traverse curtain rod face down on the floor.

    • 3). Pull the string over the pulley in the top left corner. Push the string through the left side master carrier. Tie a knot at the end of the string to secure it.

    • 4). Pull the opposite side of the string through the two pulleys on the left of the traverse curtain rod. Pull the string under the left master carrier and through the right master carrier.

    • 5). Pull the string through the two pulleys on the right side of the rod. Loop the string over the top pulley. Push the cord into the left master carrier and knot the end.

Leave a reply