Home & Garden Maintenance & Repairs

Simple Steps To Refinish Your Front Doorway

A great many home builders nowadays offer a very nice solid wood entry way which has a leaded glass insert on new homes. If you are shopping for a new residential home, expect to have your front door to appear this way for the first couple of years. With time with exposure to the natural environment for example direct sunlight and precipitation, the finish on your gorgeous door will start to wear and the door starts to seem very out of date. The shade of the door fades - for instance a rich mahogany color may fade to appear almost like Cedar after the first 5 years roughly. What's worse yet is that you will dsicover the finish begin to split and chip away. These types of doors are often very pricey to replace, often times costing hundreds of or over 1000 dollars depending on the excellence of the door. Thankfully, the other course of action you havewould be to restain your existing door. This doesn't take a skilled handyman. Weekend enthusiast could take on this project, nevertheless it does need a time devotion.

There's not a huge amount of equipment that are required for this task, though there does exist one tool which will make the whole venture much simpler - a power sander. Step one to refinishing your door would be to sand down the surface of the door. The objective of this is to do away with the top spoiled finish of the wood so that it is a nice clean flat surface. This will make it ready for you to be able to apply the new color stain. The vast majority of doors have many grooved surface areas which make a style and these will require a good amount of effort and hard work to sand down by hand (working with sandpaper or sand sponges). You will definitely be incredibly worn out from all this sanding, so for the larger sized, flatter parts of the door that don't have to have nearly as much manual precision, using a power sander could save you considerable time and energy. Of course, when sanding, you want to get three different degrees of sandpaper. You start out with the smaller number (such as 60 or 80) for the initial stage, then follow it up with finer sandpaper after which finish with the 3rd one (usually around 220). When you're done, the finish need to be free from all chips and splinters and ought to be really smooth to touch.

At this moment, you are prepared to make use of the fresh stain/color. Buy one or two superior brushes and evenly apply the stain to the surface area. You'll notice that you'll need to use two good quality applications of stain so that you can get accurate coverage of the complete door. Utilize even strokes and look for runs or drips as you apply the stain. Permit sufficient time for drying between coats. Now that the stain has been applied, you need to apply a clear coat cover to guard the new gloss. There are polyurethane goods predominantly made for this purpose that usually do not cost a lot and are well worth the bucks to make this a total refinish project. Naturally, what is the point of investing all this time and energy if you leave it halfway and not put the clear coat protection onto it? The total undertaking normally takes 2 or 3 days to accomplish, but it is well worth every penny. You will help save tons of money and have a door that looks like new, without having to spend the funds for a new door.

Leave a reply