How to Install a Fuel Filter in RC Cars
- 1). Cut the fuel line coming from the fuel tank with the utility knife. Cut the fuel line in the middle of it, so it is long enough to reconnect.
- 2). Push in one end of the fuel filter into one end of the cut fuel line. If it is hard to push in the filter, try to wiggle it in, until the fuel line reaches the base of the fuel filter.
- 3). Install the remaining end of the fuel line into the other end of the fuel filter. Wiggle-in the fuel line if you are having trouble putting it in. The fuel filter is now installed and ready for use.