Cars & Vehicles Auto Parts & Maintenance & Repairs

How to Read ABS Codes for a 2006 Impala

    • 1). Find the trapezoidal-shaped DLC connector under and to the right of the steering column.

    • 2). Plug the OBD II scan tool into this connector.

    • 3). Put the key into the ignition and turn it to the "On/Off" position. Do not start the engine.

    • 4). Use the arrow keys on the keypad to find the "read codes" command or similar command. Each scan tool is a little different, depending on the manufacturer. Write down the trouble codes and then look them up in the book that came with the scan tool. Some scan tools display the problem right next to the trouble code on the face of the scanner.

    • 5). Unplug the OBD II scan tool.

Leave a reply