Cars & Vehicles Recreation Vehicle

How to Install an AC Inverter in My Trailer

    • 1). Check your trailer manufacturer's manual to see whether your trailer runs on 30 or 50 amps, and select the appropriate inverter.

    • 2). Unplug your trailer from outside power and turn off breaker box.

    • 3). Locate a smaller AC breaker box next to your trailer's original breaker box. This smaller box should have at least one circuit breaker.

    • 4). Disconnect both your trailer's generator/outside wires and the converter wires from the original breaker box and connect them to the smaller AC breaker box. The converter AC cords go to a plug, from which wires run to the original breaker box. These are the wires that you will need to disconnect from the original box and reconnect to the smaller box. There are three of them, a black, a white and a green one, generally encased in a white coating, and they need to be connected following this color code. The generator/outside power AC cord is the same: its cord is made up of the same three wires.

    • 5). Plug the inverter into the original breaker box where the generator/outside power cord was connected with an AC cord. Again you will need to wire the three wires coming inside the AC cord, as indicated in Step 4.

    • 6). Connect another AC cord from the inverter to the new breaker box and another one from the inverter to the original box. Follow the same directions as in Step 4.

    • 7). Connect the inverter to the trailer's batteries as well, so that when outside power is cut off, the inverter may use battery power to generate AC power.

You might also like on "Cars & Vehicles"

Leave a reply