Home & Garden Maintenance & Repairs

How to Check a Safety Harness

    • 1). Check the webbing of the safety harness before any job. Inspect for any damage by bending the surface of the webbing, looking for cracks, cuts or frays. Inspect the webbing carefully by examining it closely. Check the stitching to ensure there are no broken and unraveling threads. Also check for any fading, an indication of compromised fiber structure. Any evidence of the aforementioned problems might compromise your safety in the event of a fall.

    • 2). Look over all the safety harness' metal pieces, checking for bent, chipped, loose or broken metal pieces. Make sure all rivets are tight and the buckles do not have any bending, chipped pieces or sharp, protruding edges. Make sure your D-rings (the pieces that attach your harness seat to the rope) are not warped or chipped.

    • 3). Inspect all straps and your rope. Carefully scan both the rope and straps to check for fraying and broken fibers. Your rope should be uniform and thick; if one section of the rope is thinner than the other sections, the fiber is susceptible to breakage. Be sure to check all clips on the straps, and check for loose stitching as well.

    • 4). Put on the safety harness with the help of your partner. Have your partner or co-worker make sure all straps fit in the correct position and that the harness wears correctly on your body. If you fail to put on the harness correctly, it may fail in the event of a fall.

Leave a reply